iCraft Deco Foil Stencil Card
Recently we released a new adhesive to our iCraft® Deco Foil™ line. Our new iCraft® Deco Foil™ Fusible Spray Adhesive. Most would think this is only for use on fabrics with our Deco Foil™ however it works beautifully on paper crafts too!

Here’s how you can use it for your next paper craft project and the supplies you will need:

Therm O Web Supplies:

iCraft® Deco Foil™ Liquid Adhesive
iCraft® Deco Foil™ Fusible Spray Adhesive
iCraft Deco Foil Transfer Sheet in Pumpkin & Pink Melon
Tape Runner XL
Foam Squares

Other Supplies:

Basic Grey Papers and Stencil
Flower, ink and brad from Making Memories


1) Lay the stencil over the cardstock of your choice. Use washi tape or similar item to affix the stencil in place to prevent movement during spray and while setting.

2) Use iCraft® Deco Foil™ Fusible Spray Adhesive and apply a good coat of adhesive over the stencil. Allow ample time for spray adhesive to dry.

3) Use a hot iron to set the iCraft® Deco Foil™ Transfer Sheet to the Fusible Adhesive. If using an iron, press for a good 30 seconds applying pressure while moving the iron over the paper surface. Use a pressing paper to protect the iron and surface.

4) Once you’ve heat set the Deco Foil™ to the Fusible Spray allow time for the iCraft® Deco Foil™ to completely cool and then peel back the liner to reveal the foil.

Foil Stencil Card
5) Here’s what the “negative” from the Deco Foil™ liner will look like when removed.

6) Now the fun part…making you card! Use the iCraft® Deco Foil™ Liquid Adhesive to add touches of foil to the paper. On this card the Pink Melon Foil was used as an added embellishment to the center of the paper strip on the right and also on the flowers on the diecut in the center for an added pop of Deco Foil™!

iCraft Deco Foil Card Stencil