When my kids were little I sewed almost all of their Halloween costumes based upon what they wanted to be. Now that I have grandchildren, I occasionally get special requests from them for costumes. The four-year-old Monkey Boy wanted a Batman vs Superman costume, so of course, I had to make sure he got what he wanted and make one for his brother, too.

Using the HeatnBond EZ Print Sheets was a quick and easy way to make the costumes, especially with purchased sweatshirts and pants. The capes were just as easy with very little sewing since it was made from fleece. No frayed edges when using fleece! An added bonus was that the costumes can be used for pajamas once Halloween is over.

Batman Halloween Superhero Cape and Logo, by Carol Swift, Just Let Me Quilt

cape12-001

The cape is about 30″ long and would easily work for a 2-6-year-old. Looks like he’s ready to fly!

IMG_2738

Supplies:

ThermOWeb’s HeatnBond Inkjet Transfer Sheets

Heat n Bond Fabric Fuse Liquid Adhesive

Iron/mini iron

1 yard Fleece or felt

T-shirt/sweatshirt

Hook and loop fastener


Batman Halloween Cape Instructions:

Step 1: Print pattern pieces. Tape cape pattern pieces together overlapping lines as shown:

*Cut straight across at the bottom if you want a regular superhero cape.

capea

Step 2: Fold the fleece in half. Lay pattern on fleece matching fold and fold lines of the pattern. Pin pattern in place.

Step 3: Cut around outside pattern edges, but not on the fold line.

Step 4: Cut out neck circle along the fold.

capeb

Step 5: Clip top fold on pattern piece #2.

 

cape

Step 6: Using Fabric Fuse, glue 1″ hook and loop fastener pieces to cape neck piece. Let dry. Sew around edges of Velcro to secure.

cape2

cape3

* Be sure to place Velcro on opposite sides of capes (inside/outside) so they meet up correctly.

cape4

Step 7: Using your inkjet printer, print logo that is NOT reversed on ThermOWeb’s HeatnBond Inkjet Transfer Sheets for dark fabrics following package directions.

cape7

Step 8: When ironing on fleece or felt using the transfers, you must be careful not to press too hard or leave the iron in place too long because it will melt fleece and/or leave an iron impression. It is recommended for this small logo transfer that you use a very small iron to press in place. The small inexpensive iron used for this project was purchased at a craft store.

cape5

Cut around logo without leaving any white showing (it will show on the cape if you don’t cut the white off.) Center logo face up on back of the cape. Cover with protective paper. Using the small iron, press around and on the logo, avoiding leaving the iron on fleece too long. Depending on the size of the iron-on, follow the transfer sheets directions for time amount. This project required about 45 seconds for the logo, moving the iron back and forth on all logo areas.

cape6

Lift protective paper to make sure logo is fully adhered. Let cool.

cape8

Sweatshirt:

Step 1: Using your inkjet printer, print logo that is NOT reversed on ThermOWeb’s HeatnBond Inkjet Transfer Sheets for dark fabrics following package directions.

Step 2: Following package directions, iron sweatshirt to remove any excess moisture before applying the logo.

cape10

Step 3: Cut around logo without any white showing (it will show on the sweatshirt if you don’t cut the white off.) Center logo face up on the sweatshirt. Cover with protective paper and iron for the amount suggested on the package. Remove protective paper and let cool.

cape9

Two amazing SUPERHEROES!

batman monkey boys

You can find the logo and PDF instructions  HERE.

2 Comments on QUICK Batman Halloween Costume Using HeatnBond EZ Print Sheets

  1. mary
    October 27, 2017 at 8:25 am (7 years ago)

    That is really cute and would make any little guy fly high with excitement.

  2. Sherry
    October 27, 2017 at 6:15 pm (7 years ago)

    Monkey Boys are flying in style with these Super Hero Batman costumes. Great job Carol and Therm-O-Web. <3