20 Minute Fabric Fuse No-Sew Table Runner

With spring coming, you might be tempted to update your decor. This no-sew table runner is a great way to add a pop of color and style to any room, and you can whip one up in 20 minutes or less, and make it without a sewing machine!

Measure your table. You’ll want your fabric to be between 2/3-1/2 the width of the coffee table, and about 4″ less than the length. Cut the fabric to size.

Place the fabric wrong-side-up on the ironing board. Starting with the short sides, press the fabric over 1/2″. Repeat with the other two sides.

Run a line of Fabric Fuse Liquid Adhesive along the edge, about 1/4″ away from the fold.

Finger-press the fabric down, then press with the iron. The weight of the iron will help spread out and distribute the glue. The heat of the iron will help to set the glue faster.

Flip over the table runner. Lay the trim on top, along one of the short edges. Cut the trim to the appropriate length.

Use Fabric Fuse to secure the trim in place.

Repeat with trim on the other side. Allow glue to dry. Your table runner is complete!

This table runner is so simple to make, you can change it out on a whim, with the seasons, or whenever your room needs a new pop of color.