vintage_bunny_zipper_pouch_tutorial

Hi!  Amanda here, from Jedi Craft Girl.  This spring I have become completely obsessed with appliquéing bunny silhouettes on project: quilts, wall hangings, skirts, pillows, and now my latest creation – the vintage bunny zipper pouch!  I am calling it vintage because you can use bits of vintage lace and find fabrics with a vintage-feel, like  this Grace fabric line from Anna Griffin.  This is a fast little project that would make a perfect gift.  In fact, if you sew one today, you will still have time to pop it in the mail so it arrives before Easter!  We better get started then!

 

Supplies:

Fabric; large scraps, fat quarters, etc
HeatnBond® Iron-On Fusible Interfacing
Heat n Bond® Lite
SpraynBond® Basting Spray
3 scraps of lace
zipper
Sizzix bunny die

Instructions:
Cut 4 fabric pieces 6.5″ x 9″.  Two pieces are for the lining, a solid fabric for the front, and a print for the back.
IMG_7946

Cut 2 pieces of interfacing 6.5″ x 9″ also.  Iron the fusible interfacing to the wrong side of the back and front pieces.

IMG_7947

Using Spray n Bond® basting spray, adhere the lace to the front piece.  Notice the placement – if the lace is too low, it will end up on the bottom of the bag.  If it’s too high, it will get caught in the zipper seam.

IMG_7949

Iron the Heat n Bond® Lite to the wrong side of the bunny fabric and run it through the Sizzix.  You can also hand draw a bunny silhouette on the Heat n Bond Lite and cut it out with scissors.

IMG_7945

Peel off the backing paper and iron in place.  Make sure to place it as so, so the bunny doesn’t get caught in any seams.

IMG_7950

Sew around the bunny twice.  I like to use an “open foot” so I can see all the little curves I have to sew around.

IMG_7951

I already love the bunny so much 🙂

IMG_7952

Now we are ready to assemble the pouch.  First, prepare the zipper.

For the zipper tabs, Cut 2 strips of fabric 1.5″ x 4″.  Press the short ends under 1/4″ then fold in half and press.

IMG_7953

I always buy my zippers too long, then I can cut them as needed.

IMG_7954

Trim a little off the end of your zipper to remove the metal “stop”.  Sandwich the zipper in the folded tab and sew into place:

IMG_7955

Now measure the zipper and cut it so when the 2nd tab is on it’s the same length as the fabric, 9″.  Sew the 2nd tab.  It should look like this.

IMG_7956

The whole reason for the tabs is to reduce the bulky zipper in the seams.  Cut open the folds of the tab and trim the zipper down to 1/4″ on both ends.IMG_7958

Don’t worry about the excess tab on the top, it will be cut off after the zipper is sewn in.  Align the right side of the zipper with the top edge of the front bag piece:

IMG_7959

Now add the lining fabric, right side down.  Align the top edge and pin.  With the zipper foot, sew along the top edge.IMG_7960

Trim the tab pieces that are sticking out, press, and topstitch next to the zipper:

IMG_7961

Now, do the same thing with the other side of the zipper.  It should be layered like this:

IMG_7962

Trim excess tabs, press, and topstitch along zipper.  This is how it should look:

IMG_7963

Place right sides together of the bag front and back and also right sides together of the lining.  Push the zipper toward the lining and pin on both sides:

IMG_7964

Sew around entire bag using 1/4″ seam allowance.  Leave a small opening on the side of the bag lining for turning.

TIP:  I always take about 1/8″ larger seam on the bag lining bottom – just so the lining fits nicely inside the bag.

IMG_7965

Cut a 1″ square as a pattern and notch each of the 4 corners.IMG_7966

IMG_7967

Open the notch, match seams and sew 1/4″ seam – do this on all 4 corners.

IMG_7968

Turn the bag right side out, top stitch the opening and press to smooth out any wrinkles.

It’s done and ready for the Easter Bunny to deliver!!

IMG_7975

IMG_7973


IMG_7978


It’s time!! Time to kick off our Annual Easter Egg Hunt!

That means a chance for you to find our hidden eggs on our Thermowebonline.com website! Then spell the word for your discount code! It’s the perfect time to stock up on your spring crafting supplies…interfacings, fusibles, Zots, Tape Runners and more!
Easter2014400x400

And that’s not all the fun to be had! We’re giving away a basket full of goodies for you to craft with as well! Simply follow the Rafflecopter entry form for your chance to win a surprise Easter treat! (basket not included)

400x400_blog_easter_giveaway

 

a Rafflecopter giveaway

7 Comments on Vintage Bunny Zipper Pouch

  1. Belinda K-N
    April 15, 2014 at 11:58 am (10 years ago)

    Thank you for the Easter tutorial – I always enjoy decorating for Easter and making fun baskets and gifts for my friends and family…this zipper pouch is a fun way to package some Easter treats!

  2. Renea
    April 15, 2014 at 9:09 pm (10 years ago)

    i love the family part of Easter. Thanks for the great giveaway.

  3. Lori Morton
    April 15, 2014 at 10:22 pm (10 years ago)

    Love our time with Family on Easter. Church & Dinner fixin’ together…lots of hugs & chatter…and havin fun watchin the Grankiddo’s hunt for eggs,,,,,,

  4. Lola
    April 16, 2014 at 4:52 am (10 years ago)

    Enjoy doing up baskets for the young ones and decorating for Spring!

  5. Florence
    April 17, 2014 at 12:20 am (10 years ago)

    Thanks for the tuto.
    I like children’s eyes when they find eggs in the garden !!!

  6. lesbia santiago
    August 4, 2014 at 10:17 am (10 years ago)

    me encanta este blog felicitaciones hago tus crecciones se me hacen muy fáciles con tus instrucciones, bendiciones

  7. patricia flores
    September 9, 2014 at 9:48 am (10 years ago)

    Me gusta la pagina y tambien aprender