Hello Crafty Friends!!

Larissa here today to share a Trio of Cards using Unity Toner Card Fronts and Deco Foil!! I LOVE how EASY the Unity Toner Card Fronts make it to create Cards!!

Deco Foil and Unity Cards

My 1st Card I wanted to use a Negative from a Card I made Previously!! You can find out more HERE!! I LOVE being able to use the Negative Foil leftover after foiling the Unity Toner Card Fronts!! It’s FUN being able to create ENDLESS Cards and Color Combos all from using the Negative Foil!! Plus, that means NO WASTE!! Double Bonus if you ask me!!
If you LOVE to Mass Products Cards this is one of the FUNNEST ways except for the Design will NEVER be exactly the same as the Color Combos make each one completely different!! So if you get bored easily when Mass Producing the SAME exact Card Design over and over this Technique is SURE to be one that you’ll want to try!!

I started out with the Negative Rainbow Deco Foil Transfer Sheet that I had leftover from a Previous Project!! I have it linked above if you’d like to check it out!! I adhered it to a piece of Deco Foil Toner Sheets!! Then ran it through my Laminating Machine!!

After I ran it through my Laminating Machine I Cut a Piece of Silver Star Deco Foil Large enough to cover the sheet of Rainbow Foiled Toner Sheet and then placed it on top of the Rainbow Foiled Toner Sheet and ran it through my Laminating Machine again!!

SWOON!! Remove the Negative Film (this is my FAVORITE part) and reveal the STUNNING results!! I Die Cut the Rainbow Foiled Toner Sheet using a Stitched Rectangle Die!!
Then I added some Picket Fence and Black Soot Distress Pain Splatters for some Texture!! I REALLY LOVE adding this step as not only does it add some MUCH NEEDED Texture, but it also helps to add even more interest to the Panel!!
Then I Die Cut a Circle Die Cut from some White Cardstock and Stamped and Embossed the Sentiment!! I stamped with Versa Fine Black Onyx Ink and Embossed with Wow Embossing Powder In Clear Gloss!! I Die Cut another larger Circle from Black Cardstock in order to create a Frame for the Sentiment and then adhered it to the Card Panel using some 3-D Foam Squares!!

A few Holographic Snowflakes and Iridescent Jewels finishes off the Design!!

Products Used:
Therm O Web Products:
Deco Foil in Rainbow and Silver Stars
Deco Foil Toner Sheets

Products Used:
Therm O Web Products:
Deco Foil in Rainbow and Silver Stars
Deco Foil Toner Sheets
NEW Unity Stamps Toner Card Fronts in Snow Many Flakes
Ultra Bond Adhesive 
Gina K. Designs Foam Squares
Zotz Bing Adhesive Dots 

Other Products:
Reverse Confetti Love is in the Air Stamp Set
Reverse Confetti Love is in the Air Die Set
Reverse Confetti Big Love Die Set
Pretty Pink Posh Holographic Sequins
Pretty Pink Posh Iridescent Jewels
Versa Fine Black Onyx Ink
WoW Embossing Powder in Clear Gloss & Red Glitz
Distress Paint in Black Soot & Picket Fence

Ultra Bond Adhesive 
Gina K. Designs Foam Squares
Zotz Bing Adhesive Dots 

Other Products:
Reverse Confetti Love is in the Air Stamp Set
Reverse Confetti Love is in the Air Die Set
Reverse Confetti Big Love Die Set
Pretty Pink Posh Holographic Sequins
Pretty Pink Posh Iridescent Jewels
Versa Fine Black Onyx Ink
WoW Embossing Powder in Clear Gloss & Red Glitz
Distress Paint in Black Soot & Picket Fence

For my 2nd Card I’ve started with the NEW Unity Toner Card Front in Flurry Forest!!
I Started by Masking off the Ground with some Purple Tape!!  Then I Inked the Toner Card Front first with some Wilted Violet Distress Oxide Ink, then Blueprint Sketch, and finally Tumbled Glass to create a BEAUTIFUL Night Sky!! SWOON!!

Next, I Masked the Sky and inked the Ground with some Vintage Photo Distress Oxide Ink!! Then I Masked around the Trees again using some Purple Tape and Inked the Trees with Bundled Sage, Peeled Pain,t and Lucky Clover Distress Oxide Inks using an Ink Dauber!!

You could stop right here and have a STUNNING Card Panel if you wanted too!!??
Or take it to the NEXT level using Deco Foils!!

First I Cut a couple Pieces of Rose Gold Deco Foil to Foil the Tree Trunks with!! I used a couple small pieces of Purple Tape to hold the Deco Foil pieces in place on the Toner Card Front!!

Next, I Cut a Piece of Lime Deco Foil large enough to cover the center Tree again with some Purple Tape to help hold it in place!!

Then I Cut a couple Pieces of Lily Pad Deco Foil large enough to cover the two Triangle Trees Tree again with some Purple Tape to help hold it in place!!

Then I Cut a couple Pieces of Jade Deco Foil large enough to cover the last two trees again with some Purple Tape to help hold it in place!!

The last Step in the Foiling process was cutting a Piece of Rainbow Shattered Glass Deco Foil large enough to cover the entire Card Panel!! Again using Purple Tape to secure the Foil in place!! Then I added the panel to the Folded Parchment Paper and ran it through my Laminating Machine!!

SWOON!! After running it through the Laminating Machine here are the final results!! Such a BEAUTIFUL Card Panel all on its own!! Let’s finish it and turn it into a Card!!

I wanted to Die Cut the NEW Reverse Confetti Big LOVE Die from the Background of the Toner Panel so I could Layer it for an inlaid look!!

Then I Deco Foiled a Piece of Deco Foil Toner Sheet with some of the NEW Glass Slipper Deco Foil Sheets!! Then I Die Cut the NEW Reverse Confetti Big Love Die from the Glass Slipper Deco Foiled Toner Sheet!!
I Stamped and Embossed the Sentiment “is in the air” using Versa Fine Black Onyx Ink and Embossed with WoW Embossing Powder in Clear Gloss!! Then I Layered the Die Cut LOVE letters from the Toner Card Front onto the Deco Foiled Toner Sheets using some Ultra Bond Adhesive!! Then I adhered the LOVE Die Cut to the Card also using Ultra Bond Adhesive!! I wanted the Heart to be popped up so I adhered to it with some Gina K Designs Foam Squares!!
I added some Iridescent Jewels with Zots Bling Adhesive Dots to finish off the Design!! 

Products Used:
Therm O Web Products:
Deco Foil in Lime, Lily Pad, Glass Slipper, Jade & Rainbow Shattered Glass
Deco Foil Toner Sheets
NEW Unity Stamps Toner Card Fronts in Flurry Forest
Ultra Bond Adhesive 
Gina K. Designs Foam Squares
Zotz Bing Adhesive Dots 

Other Products:
Reverse Confetti Love is in the Air Stamp Set
Reverse Confetti Love is in the Air Die Set
Reverse Confetti Big Love Die Set
Pretty Pink Posh Iridescent Jewels
Versa Fine Black Onyx Ink
WoW Embossing Powder in Clear Gloss
Distress Paint in Black Soot & Picket Fence
Distress Oxide Inks

For my 3rd Card I want to show how you could make the Sentiment and an Image the Focal Point of a Simple Card that Packs a whole lot of WOW!! 
Then I Deco Foiled a Piece of Deco Foil Toner Sheet with some of the NEW Glass Slipper Deco Foil Sheets!! Then I Die Cut the NEW Reverse Confetti Big Love Die and a Rectangle Die from the Glass Slipper Deco Foiled Toner Sheet!! 
Next, I Cut a Piece of Rainbow Shattered Glass Deco Foil and placed it over a piece of Deco Foil Toner Sheets then ran it through my Laminating Machine!! I Die Cut the Smaller Heart from the Deco Foil!!

I adhered the Rainbow Shattered Glass Heart on to the Die Cut using some Gina K Designs Foam Tape to POP it up off the Die Cut Love!! Then I added some White Gel Pen Highlights!!

I Inked with some Tumbled Glass Distress Oxide Ink and then added some Water Splatters and Black Soot Distress Paint Splatters!! I Stamped and Embossed the Dog Image and then used Copic Markers to color in the Image!! I added White & Black Gel Pens for some Highlights!!

A Pink Clay Heart was added to finish off the Design using a Zots Bling Adhesive Dot!!

Products Used:
Therm O Web Products:
Deco Foil in Glass Slipper & Rainbow Shattered Glass
Deco Foil Toner Sheets
Ultra Bond Adhesive 
Gina K. Designs Foam Squares
Zotz Bing Adhesive Dots 

Other Products:
Reverse Confetti Love is in the Air Stamp Set
Reverse Confetti Love is in the Air Die Set
Reverse Confetti Big Love Die Set
Gina K Designs Pink Clay Heart Embellishment
Versa Fine Black Onyx Ink
WoW Embossing Powder in Clear Gloss
Distress Paint in Black Soot & Picket Fence
Distress Oxide Inks

THANKS SO MUCH for stopping by today!! I hope I’ve INSPIRED you with some ideas on ways to add some Sparkle and Texture to your LOVE Projects using Deco Foil Products!! Whether you use them for a Special Birthday, Anniversary, or even Valentine’s Day I KNOW they’ll bring JOY to the recipient!!

If you create something please share it with us on Social Media using the hashtags #decofoil #thermoweb #unitystampsco as we LOVE to see what you create!!

THANKS for your SWEET comments too!! They mean a lot!!
I hope you have a Fabulous Week!!

Larissa Heskett

I enjoy crafting in every way, jewelry making, baking/cooking, gardening, singing, nature and taking photos. I also LOVE to try new techniques and experiment with my supplies!! I look forward to inspiring you with the AMAZING Therm O Web products!!